SunTech Tango+ Stress BP

Epson V700 Scanner

Product Features

SunTech Tango+ Stress BP is a non-invasive multi-parameter monitor measuring blood pressure and oxygen saturation for use in cardiac or exercise stress testing. It measures and displays an adult patient’s systolic and diastolic blood pressure and the percent oxygen saturation of arterial blood.

Product Specification

Blood Pressure Measurement

Measurement:

Auscultatory, using R-wave gating and k-sound analysis, during all static and active phases of stress testing. Systolic pressures correlate to a K-1 Korotkoff sound. Diastolic pressures correlate to K-5 Korotkoff sound.
The device is designed to function in the presence of a normal ECG sinus rhythm. There are some physical conditions (i.e. Bundle Branch Block, Arrhythmias, Arial Fibrillation, Ventricular Fibrillation, Pacemakers, etc) that may limit the ability of Tango+ to obtain an accurate reading.

Range:

Pressure:
Dia 20-150 mmHg
Sys: 50-280 mmHg

 Heart Rate: 40-200 BPM
(beats per minute)

Accuracy:

Blood pressure measurements determined with this device are equivalent to those obtained by a trained observer using the cuff /stethoscope auscultation method, within the limits prescribed by the American National Standard, Manual, electronic or automated sphygmomanometers.

Conditions for Use:

Operating:
10°C (50°F) to 40°C (104°F) Less than 95% RH non-condensing.

Storage:
-20°C (-4°F) to 50°C (122°F) Less than 95% RH non-condensing.

The system might not meet its performance specifications if used or stored outside the specified temperature and humidity ranges listed above.

Power:

External power supply, use only SunTech part number 19-0012-00. Input: 100-240 VAC @ 1.6A max, 50-60 Hz. Output +9VDC @ 5A IEC 320 type input connector.

Calibration:

The accuracy of cuff -pressure transducers/indicators should be verified annually.

Safety Systems:

ndependent hardware over-pressure circuit and redundant software overpressure algorithm to limit cuff pressure to less than 300 mmHg (+20/-10mmHg). Independent hardware timing circuit and redundant software timer algorithm to limit the duration of a blood pressure cycle to less than 180 seconds.

Dimensions:

Size: 22.8 cm x 15.9 cm x 9.7 cm (9.0” x 6.3’’ x 4.1’’)
Weight: 1.2 Kg (42.6 oz)

Standards:

UL60601-1, CAN/CSA C22.2 601-1
EN 60601-1, IEC 60601-2-30, IEC 60601-1-2 (EMC), IEC 60601-2-49, ISO 9919, AAMI SP10:2002 + A1:2003

Meets EN 1060-1, Specification for non-invasive sphygmomanometers – Part 1: General requirements and EN 1060-3, Non-invasive sphygmomanometers – Part 3. Supplementary Requirements for Electro-Mechanical BP Measuring Systems.

Classifications:

Equipment Classification: Class II; Mode of Operation: Continuous

Pulse Oximetry

Accuracy:

70 - 100% ± 2 digits (± 1 Standard Deviation*).

* Standard Deviation is a statistical measure up to 32% of the readings may fall outside those limits.